You think your drinking water is safe? Maybe you've purchased the latest device and attached it to your faucet. It sure looks clean and clear. However, you really cannot tell if it is safe simply by looks alone. In the past, it was acceptable to take sub-par measures like boiling or using any old home filter to get "pure" water. But today, such methods are simply not enough for clearing out the many contaminants found issuing from your tap . Knowing more about the water purification process is a step in the right direction, as well as learning about the toxins that can enter your domestic supply.
Believe it or not, next to chlorine, lead is the most frequent contaminant found in tap water. This contamination usually happens when it travels from the main supply in the street to your home's faucet. That's why it's so hard to explain water purification on a large scale. The treatment typically takes place at a central location. Unfortunately people don't take into account what happens to their water after that.
In fact, most lead in drinking water comes from corrosion of lead piping, solder and other plumbing fixtures inside the home. As you may know, all of these types of plumbing fixtures are made with about 8 to 15 percent lead. It's also known that the EPA approximates that a very large percentage of homes have some type of plumbing system made with lead that can bleed into tap water. What's more, the EPA has determined that there any level of lead in drinking water is deemed unsafe.
One tip outside of filtration you can follow is to use cold water for consumption and cooking and especially for mixing baby formula. The reason for this is that hot water is more likely to contain higher levels of lead in it than cold.
Another way to safeguard your drinking water is to put a home filtration system in place. This is an important step in protecting you and your family from harmful contaminants. A twin-cartridge water filter system can be a vital asset and help you keep your children safer. The way a dual filter system works is that it employs two methods in the purification process. A combination of carbon filtration, ion exchange and sub-micron filtration is accomplished right at your kitchen tap.
Let me explain water purification a little further from a dual-filtration perspective. A dual system works to filter out chlorine, the problematic lead (mentioned earlier) and even pharmaceuticals and cysts (chlorine-resistant parasites). While filtering out all of this junk the system also works to keep the natural trace minerals in your water. A treatment product like this can be installed on a standard kitchen faucet. Be sure that when you are shopping for a system, you find one that can produce at least 30 gallons of ultra-filtered water per hour.
In conclusion, even natural spring water has to be tested before you know what kind of treatment it needs. So be cautious about the water you drink. Also, be aware of the local treatment process and how you can work to eliminate lead from your home supply. You will find not only is a home filtration process economical, but you can have great tasting water.
